Blue Dialux

categories

Blue Dialux

  • Product Code: B1030702
  • Availability: In Stock
BLUE DIALUXDIALUX® brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.Blue DIALUX® is an all around premium polishing compound formulated to give a high luster shine.DILALUX® blue can be used on all metals and...

BLUE DIALUX

  • DIALUX® brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.
  • Blue DIALUX® is an all around premium polishing compound formulated to give a high luster shine.
  • DILALUX® blue can be used on all metals and chrome alloys to produce a final high shine finish, It is used as a last step on all metals to provide that extra gleam.
  • Use with a white finex muslin buff or with a chamois buffing wheel, make sure the buff is clean, use a buff rake to remove and clean buff.
  • The DIALUX blue polish is widely used by jewelers, silverrsmiths, auto wheel detailing, and metalsmiths, For more details please check product description.


* Utilizes graded abrasives.
* Blended with additives.
* Long lasting composition with minimum usage.
* Good adhesion to buffing wheels.
* Produces – high luster.
* Only minimal quantities need to be used.
* Bar size 4″ x 1 1/2″ x 1 1/2″ – weighs approx 130 grams.
* Our recommendations and suggestions on buffing to obtain the best results possible:
– Use the right compound for the metal that you are trying to polish It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.
– Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove lines and scratches.
– Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake.
– Segregate your buffs for the various metals, gold, silver, brass … Try not to use the same buff for all metals.
– If you have to then make sure buffs are cleaned (dressed) with a buff rake.
– A clean buffing wheel edge is important.
– Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.
– Whenever you are working with platinum never use a buff that was used for another type of metal.
– Work safe! Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed.
– Protection – protect yourself, your fingers and hands, your face and eyes and use respirators.

Write a review

Note: HTML is not translated!
    Bad           Good