SWISS BLADE 2/0

Vallorbe Glardon jewellers saw blades are high quality, Swiss made saw blades. They have straight, uniform sharp teeth, and retain their flexibility. Vallorbe saw blades are made from the highest quality steel, making them less likely to break whilst working. Vallorbe Saw blades are sold in bundles of 12 (one dozen). Blade thickness: 0.26mm Blade width : 0.52mm Blade Length : 13cm Teeth per cm: 22 Drill Size for piercing: 0.55mm Recommended for cutting metal: 0.6mm to 0.8mm thick. Helpful Hints for Saw Blades and Sawing : Check the tension of the saw blade before sawing, a loose blade will break easily and will not cut properly. Choose a saw blade fine enough to have at least two teeth within the thickness of the metal you are cutting. Use a finer blade when cutting curves than when cutting a straight line. Hold the saw frame in as vertical a position as possible and when sawing use long and even strokes. When sawing a circle or curve turn the metal to the saw instead of trying to saw around the material. Hold the saw frame lightly, the motion should come from the elbow not the wrist. For smooth cutting use a lubricant like Bees wax – 998 018 or Burr Life 998 021. Saw blades range from Size 4 = coarsest, to Size 8/0 = finest. Most commonly used size is 2/0 (medium)